Pinell SUPERSOUND 202 - Page 27

27
Problem
Cause
Solutions
Cannot connect to
network
Insufficient Wi-Fi signal strength
Check distance to router; see if
a computer can connect to the
network in this location
Unknown encryption method
Change encryption method on
router. Supersound 202 supports
WEP, WPA and WPA2
Unusual network configuration
Setup network manually through
Menu > System settings >
Network > Manual settings
Firewall preventing access
Check the following ports are open
on the router: UDP and TCP ports 80
and 123; DNS port 53.
Windows shares: ports 135–139 and
445.
Cannot connect to
network
Internet connection down
Check that Internet is working
for a computer connected to the
same network
Firewall preventing access
Check the following ports are
open:
UDP and TCP ports 80 and 123;
DNS port 53.
Some Internet radio stations may
require additional ports to be opened.
Cannot play
particular
Internet radio
station
Station not broadcasting,
overloaded or insufficient
bandwidth.
Station broadcasting using
unknown codec.
Link out of date.
Try other stations; try listening on
computer via Internet radio portal
website; try later.