Pioneer AVIC-F20BT - Adjusting the picture

Adjusting the picture
CAUTION
For safety reasons, you cannot use some of these
navigation functions while your vehicle is in mo-
tion. To enable these functions, you must stop in
a safe place and apply the handbrake. Refer to
Important Information for the user (a separate
manual).
You can adjust the picture for each source and
rear view camera.
1 Press and hold the MODE button.
The “Picture Adjustment” screen appears.
2 Touch [+] or [–] to adjust the desired
item.
! Brightness: Adjusts the black intensity.
! Contrast: Adjusts the contrast.
! Colour: Adjusts the colour saturation.
! Colour Temp.: Adjusts the tone of colour
(red is emphasised or green is empha-
sised).
! Dimmer: Adjusts the brightness of display.
p Touching [Camera] switches to the picture
adjustment screen for the rear view cam-
era.
p Touching [Source] while adjusting the rear
view camera image returns you to the pre-
vious screen.
p The adjustments of Brightness and
Contrast are stored separately when your
vehicle’s headlights are off (daytime) and
when your vehicle’s headlights are on
(nighttime). These are switched automati-
cally depending on whether the vehicle’s
headlights are on or off.
p The adjustments of Dimmer is stored sepa-
rately when your vehicle’s headlights are off
(daytime) and when your vehicle’s head-
lights are on (nighttime). Dimmer is
switched automatically only when the value
of nighttime is lower than the value of day-
time.
p You cannot adjust Colour for the source
without a video and navigation map display.
p The setting contents can be memorised se-
parately for the following screen and the
video image.
— AM/FM/CD/ROM/iPod(Music)/SD
(audio)/USB(audio)/Bluetooth Audio/
EXT1(audio),EXT2(audio)/source off
screen (for AVIC-F20BT)
— AM/FM/CD/ROM/iPod(Music)/SD
(audio)/USB(audio)/Bluetooth Audio
source off screen (for AVIC-F920BT,
AVIC-F9210BT, and AVIC-F9220BT)
— AV1 and iPod(Video)
— DVD-V and DivX
— SD(Video) and USB(Video)
— AV2(Video) and EXT1(Video), EXT2
(Video) (for AVIC-F20BT)
— AV2(Video) (for AVIC-F920BT, AVIC-
F9210BT, and AVIC-F9220BT)
— Rear view camera image
— Map screen
p The picture adjustment may not be avail-
able with some rear view cameras.
p Because of the LCD screen characteristics,
you may not be able to adjust the screen at
low temperatures.
3 Touch [+] or [–] to adjust the desired
item.
Each touch of [+]or[–] increases or decreases
the level of the desired item.
4 Touch
to return to the previous
screen.
Engb
143
Chapter
27
Customising preferences
Customising preferences