EasyManua.ls Logo

Pioneer AVIC-F20BT - Adjusting Loudness; Using Subwoofer Output; Using the High Pass Filter

Pioneer AVIC-F20BT
200 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 Touch the frequency that you want to
adjust the level.
6 Touch [a]or[b] to adjust the level of
the equaliser band.
Each time you touch [a]or[b], the level of
the equaliser band increases or decreases.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Display the AV Sound Settings
screen.
= For details, refer to Displaying the AV
Sound Settings screen on page 147.
2 Touch [Loudness].
Each time you touch [Loudness], the level is
selected in the following order:
Off Low Mid High
Using subwoofer output
The navigation system is equipped with a sub-
woofer output mechanism, which can be
turned on or off.
p This function is not available when Sub
Woofer is Off.
1 Display the AV Sound Settings
screen.
= For details, refer to Displaying the AV
Sound Settings screen on page 147.
2 Touch [Sub Woofer].
3 Touch [On] to turn subwoofer output
on.
To turn subwoofer output off, touch [Off].
4 Touch [Reverse] or [Normal] to select
the phase of subwoofer output.
5 Touch [+] or [] next to Level to adjust
the output level.
+6 to 24 is displayed as the level is in-
creased or decreased.
6 Touch [c]or[d] next to
Frequency(Hz) to select cut-off fre-
quency.
Each time you touch [c]or[d], cut-off fre-
quencies are selected in the following order:
50Hz 63Hz 80Hz 100Hz 125Hz
Only frequencies lower than those in the se-
lected range are output from the subwoofer.
Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, activate HPF
(high pass filter). Only frequencies higher than
those in the selected range are output from
the front or rear speakers.
1 Display the AV Sound Settings
screen.
= For details, refer to Displaying the AV
Sound Settings screen on page 147.
2 Touch [HPF].
Each time you touch [HPF] selects cut-off fre-
quencies in the following order:
Off 50Hz 63Hz 80Hz 100Hz
125Hz
Engb
150
Chapter
27
Customising preferences

Table of Contents

Other manuals for Pioneer AVIC-F20BT

Related product manuals