To Next PageTo Next PageWhy BD-LIVE feature does not work on Pioneer Blu-ray Player?
To address BD-LIVE feature issues on your Pioneer Blu-ray Player: - Connect a USB storage device with at least 1GB of free space. - Make sure the unit is properly connected to your local network and can access the internet. - If your broadband speed is insufficient, contact your ISP to increase it. - Check that the BD-LIVE connection option in the Setup menu is set to Permitted.
What to do if the remote control does not work properly with Pioneer Blu-ray Player?
If the remote control for your Pioneer Blu-ray Player isn't working correctly, it may be due to several reasons: - Ensure that the remote control is pointed directly at the remote sensor on the unit. - Make sure you are not too far from the unit. - Remove any obstacles that might be blocking the path between the remote control and the unit. - Check the battery in the remote control and replace it if necessary.
Why is my Pioneer BCS-HW919 remote control not working properly?
The remote control may not be pointed at the remote sensor of the unit, or it might be too far away. An obstacle could be blocking the path between the remote and the unit. Also, the batteries in the remote control might be exhausted.
What to do if my Pioneer Home Theater System unit does not start playback?
First, make sure you've inserted a playable disc, checking its type, color system, and regional code. Ensure the disc is placed with the playback side down and correctly positioned inside the guide on the disc tray. If the disc is dirty, clean it. Finally, cancel the Rating function or change the rating level.
Why are streaming video services often stopped or “bufefr” during playback on my Pioneer BCS-HW919 Home Theater System?
Your broadband service speed may not be fast enough to stream video services. Contact your Internet Service Provider (ISP) and increasing the broadband speed is recommended.
How to fix Pioneer Home Theater System when the unit is plugged in, but the power will not turn on or off?
You can reset the unit as follows: 1. Press and hold the STANDBY/ON button for at least five seconds. This will force the unit to power off then turn the unit back on. 2. Unplug the power cord, wait at least five seconds, and then plug it in again.
Why is BD-LIVE feature not working on my Pioneer Home Theater System?
The connected USB storage may not have enough space; connect a USB storage with at least 1GB free space. Ensure that the unit is correctly connected to the local area network and can access the internet. Your broadband speed may not fast enough to use the BD-LIVE features, so contact your Internet Service Provider (ISP) and increase the broadband speed is recommended. Check that the [BD-LIVE connection] option in the [Setup] menu is set to [Permitted], not [Prohibited].
What to do if there is no picture on Pioneer Blu-ray Player?
If there's no picture on your TV when using the Pioneer Blu-ray Player, first, make sure you've selected the correct video input on your TV. Then, check that all video connections are secure. You might also need to verify that the HDMI Colour Setting in the Setup menu matches your video connection type. If the resolution is not supported, change the resolution to one that your TV accepts.
How to fix Pioneer BCS-HW919 Home Theater System if the power does not turn on?
Plug the power cord into the wall outlet securely.
Why is access point not displayed on the “Access point name” list of my Pioneer Home Theater System?
The access point or wireless LAN router may not broadcast its SSID. Set your access point to broadcast its SSID through your computer. Your network device such as access point may not set with available frequency range and channel that this player can support. Try setting the frequency range and channel on the network device setting.
General| Brand | Pioneer |
|---|---|
| Model | BCS-HW919 |
| Category | Home Theater System |
| Audio Channels | 5.1 |
| HDMI Inputs | 4 |
| HDMI Output | 1 |
| Bluetooth | Yes |
| 3D Playback | Yes |
| Blu-ray Player | Yes |
| USB | Yes |
| Ethernet | Yes |
| DLNA | Yes |
| Subwoofer | Yes |
| Remote Control | Yes |
| Speaker Configuration | 5.1 |
| Streaming Services | YouTube |
| Audio Decoding | Dolby Digital, DTS |
| USB Port | 1 |
| Optical Input | 1 |
| Coaxial Input | 1 |
