To Next PageTo Next Page
Need help?Do you have a question about the Pioneer CB009GMFILCFHD and is the answer not in the manual?
Instructions to prevent injury, property damage, and ensure safe operation.
Critical warnings regarding installation, operation, and potential hazards.
Lists indoor and outdoor unit model numbers by type and capacity.
Identifies key components of various indoor and outdoor unit types.
Details specific features for Duct, Cassette, Console, and Ceiling-floor units.
Provides detailed dimensions for various indoor unit types (Duct, Cassette, Console, Ceiling-floor).
Provides detailed dimensions for outdoor units by model number.
Specifies required clearance around indoor units for installation and maintenance.
Specifies required clearance around outdoor units for installation and maintenance.
Electrical connection diagrams for various indoor unit models.
Electrical connection diagrams for outdoor unit models.
Graphs illustrating fan performance characteristics based on static pressure and airflow.
Electrical specifications including voltage, frequency, and current ratings for indoor units.
Noise level measurements (dB(A)) for indoor and outdoor units.
Lists various accessories provided with different unit types for installation and operation.
Details power supply requirements, circuit breaker ratings, and wiring sizes.
Guidelines for choosing optimal installation locations for indoor and outdoor units.
Step-by-step instructions for installing various indoor unit types.
Procedures for installing the outdoor unit, including service space and bolt pitch.
Detailed steps for installing refrigerant piping, including length, flare, and connection.
Guidelines and key points for properly installing drainage piping to prevent leaks.
Procedures for evacuating the system and performing leak tests.
Instructions for calculating and adding refrigerant charge based on pipe length.
Procedures and material selection for insulating refrigerant and drainage pipes.
Guidelines for safe and compliant electrical wiring installation.
Procedures for verifying correct installation and system function before operation.
Definitions for common sensor and component abbreviations used in the manual.
Explains the meaning of icons displayed on indoor unit control panels.
Details various protection mechanisms for the compressor and unit operation.
Describes different operating modes (Fan, Cooling, Heating, Auto, Drying) and their functions.
Lists error codes displayed by indoor units and their corresponding LED status.
Lists error codes indicated by LEDs on outdoor units for specific models.
Provides troubleshooting steps for specific error codes and malfunctions.
Procedures for measuring the resistance of temperature sensors.
Measures the resistance value of each winding in the compressor.
Method for checking the continuity of the IPM module.
Cooling and heating mode pressure charts based on indoor and outdoor temperatures.
Step-by-step guide for disassembling Ducted and Console indoor unit types.
Step-by-step guide for disassembling outdoor units for specific model series.
General