To Next PageTo Next Page
Need help?Do you have a question about the Pioneer CB018GMFILCFHD and is the answer not in the manual?
General| Category | Heat Pump |
|---|---|
| Power Supply | 208-230V/60Hz/1Ph |
| HSPF | 9 |
| Refrigerant | R410A |
| Operating Temperature (Cooling) | 5°F to 115°F |
| Heating Capacity | 18000 BTU/h |
| Cooling Capacity | 18000 BTU/h |
Instructions to prevent injury to users, property, and equipment.
Important warnings and cautions regarding installation, operation, and maintenance.
List of model numbers for indoor and outdoor units.
Diagrams identifying key parts of indoor and outdoor units.
Highlights of features for different unit types like Duct, Cassette, Console.
Detailed dimensions for various indoor unit models, including Duct units.
Detailed dimensions for outdoor unit models.
Required clearances for installation and maintenance of indoor units.
Required clearances for installation and maintenance of outdoor units.
Schematics showing electrical connections for various indoor units.
Schematics showing electrical connections for outdoor units.
Measured noise levels for different indoor unit models.
Measured noise levels for outdoor units.
List of accessories included or available for duct units.
List of accessories included or available for cassette units.
List of accessories included or available for console units.
List of accessories included or available for ceiling-floor units.
Guidance for selecting appropriate locations for indoor and outdoor unit placement.
Step-by-step instructions for installing various types of indoor units.
Steps and considerations for installing the outdoor unit.
Steps for properly installing and connecting refrigerant pipes.
Guidelines and procedures for installing the condensate drainage system.
Procedures for evacuating the system and checking for leaks.
Procedure for calculating and adding refrigerant based on pipe size and length.
Guidelines for safe and compliant electrical wiring installation.
Final checks and procedures before operating the installed air conditioner.
List of abbreviations used for sensors and parameters.
Explanation of icons displayed on indoor unit control panels.
Details on various protection mechanisms for the unit's components.
Description of different operating modes like Fan, Cooling, Heating, and Auto.
List of error codes displayed on the indoor unit and their meanings.
List of error codes displayed on the outdoor unit and their meanings.
Troubleshooting steps for specific malfunction codes and symptoms.
Methods for checking the functionality of key components like sensors and compressors.
Step-by-step guide for disassembling various indoor unit types.
Step-by-step guide for disassembling outdoor units by model.
