To Next PageTo Next Page
Need help?Do you have a question about the Pioneer CB024GMFILCFHD and is the answer not in the manual?
General| Category | Heat Pump |
|---|---|
| Refrigerant | R410A |
| Heating Capacity | 24000 BTU |
| Cooling Capacity | 24000 BTU |
| Power Supply | 208/230V, 1-phase, 60Hz |
| HSPF | 9.0 |
Crucial safety instructions for preventing injury and damage.
Critical warnings regarding installation, operation, and potential hazards.
Identifies specific indoor and outdoor unit model configurations.
Details the components and their locations within the units.
Highlights key functionalities and design aspects of different unit types.
Provides detailed measurements for various indoor unit types.
Lists the physical dimensions for outdoor units.
Specifies clearance requirements for indoor unit installation and maintenance.
Details required clearances around the outdoor unit.
Shows electrical connections for indoor units.
Illustrates electrical connections for outdoor units.
Provides noise level data for different indoor unit types.
Lists noise levels for outdoor units.
Guidelines for choosing optimal installation sites for units.
Step-by-step instructions for installing indoor units.
Procedures for installing the outdoor unit.
Instructions for connecting refrigerant lines.
Procedures for setting up the condensate drainage system.
Critical steps for system preparation and leak detection.
Guidelines for insulating refrigerant lines.
Key considerations for electrical connections.
Steps to verify the system after installation.
Defines technical terms and sensor designations.
Describes safety features and protection mechanisms.
Explains different operating modes and features.
Lists error codes for indoor unit malfunctions.
Lists error codes for outdoor unit malfunctions.
Provides troubleshooting steps for specific error codes.
Procedures for taking apart indoor units.
Procedures for disassembling outdoor units.
