EasyManua.ls Logo

Pioneer CM Series User Manual

Pioneer CM Series
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CM
-
S54T/CM
-
S56T/
CM
-
S58T
CM Series
http://pioneerproaudio.com
Installation and Instruction Manual
Surface mount speaker
For installation and other support information, visit the above site.

Other manuals for Pioneer CM Series

Question and Answer IconNeed help?

Do you have a question about the Pioneer CM Series and is the answer not in the manual?

Pioneer CM Series Specifications

General IconGeneral
Configuration2-Way
Tweeter Size1 inch
Sensitivity88 dB
Woofer Size6.5 inches
Power Handling (RMS)80 watts

Summary

Introduction

Read Before Use

Hearing Safety and Usage Guidelines

Guidance on safe listening levels and observing key safety rules for hearing protection.

European Product Disposal

Information on proper disposal of electronic products in compliance with EU legislation.

Installation

General Installation Precautions

Ensuring professional installation, structural integrity, fall prevention, and avoiding unsuitable environments.

Connecting Loudspeakers

Instructions for connecting the loudspeaker to other equipment, ensuring proper connection and stability.

Outdoor Installation Considerations

Advice on protecting the loudspeaker from rain, sunlight, and snow accumulation outdoors.

Usage Methods

Operational Safety and Maintenance

Guidelines for safe operation, maintenance, and preventing hazards like electric shock, fire, and ingestion.

Usage Restrictions

Conditions to avoid during use, such as high volumes, distorted sound, or prolonged use at high volumes.

Checking the Accessories

Installation and Connection

Attaching the U-Bracket to a Wall or Ceiling

Step-by-step instructions for attaching the U-bracket to the loudspeaker and mounting it securely.

Attaching the Fall Prevention Wire to the Speaker

Connecting and Setting the Input Selection Switch

Loop through connection

Method for connecting multiple speakers in series, facilitating troubleshooting.

Parallel connection

Method for connecting multiple speakers in parallel for independent operation.

Attaching the U-Bracket to the Loudspeaker

Input Selection Switch Settings

Guide to setting the input selection switch for 70V, 100V, or 8 Ohm operation and wattage.

Installing the Loudspeaker Without a U-Bracket

Specifications

Dimensional Drawings

Related product manuals