To Next PageTo Next Page
Need help?Do you have a question about the Pioneer CYB Series and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity (BTU/h) | 9000 - 36000 |
| SEER Rating | Up to 22 |
| HSPF Rating | Up to 10 |
| Voltage (V) | 208/230 |
| Refrigerant | R410A |
| Features | Inverter Technology |
| Dimensions (Indoor Unit) | Varies by model |
| Dimensions (Outdoor Unit) | Varies by model |
| Weight (Indoor Unit) | Varies by model |
| Weight (Outdoor Unit) | Varies by model |
Read manual, use qualified personnel, follow NEC/CEC, installation instructions.
Disconnect power, ground unit, use earth leakage breaker, proper wiring.
Prevent refrigerant leaks, avoid toxic gas, manage concentration, use correct parts.
Read manual first, installation by qualified persons only.
Avoid flammable materials, ensure unit stability, check for refrigerant leaks.
Warnings against installing near flammable materials and risks of unit falling.
Cut, deburr, flare pipe ends using correct tools and torque.
Connect manifold, vacuum pump, evacuate system to specified vacuum level.
Perform leak check by monitoring vacuum, open/close service valves carefully.
Do not mix refrigerant types; use only R410a.
Use licensed electrician, comply with regulations, follow wiring diagram.
Install circuit breaker, ensure proper grounding, avoid connecting to pipes/wires.
Connect wires securely, avoid mixing gauges, prevent stress on terminals, seal gaps.
