Need help?Do you have a question about the Pioneer DDJ-400 and is the answer not in the manual?
General| MIDI | 24 bit |
|---|---|
| Sample rate | 44.1 kHz |
| Mixer section | Yes |
| Product color | Black |
| Frequency range | 20 - 20000 Hz |
| USB direct playback | - |
| Built-in optical drive | No |
| Number of mixer channels | 2 channels |
| Signal-to-Noise Ratio (SNR) | 103 dB |
| Number of scratcher platters | 2 |
| Total Harmonic Distortion plus Noise (THD+N) (USB) | 0.005 % |
| Minimum RAM | 4 GB |
| Minimum processor | Core i7, i5, i3 |
| Mac operating systems supported | Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave |
| Windows operating systems supported | Windows 10, Windows 7, Windows 8.1 |
| Cables included | USB |
| USB connector type | USB Type-B |
| Headphone connectivity | 3.5 mm |
| Microphone connectivity | 6.3 mm |
| Number of microphone inputs | 1 |
| Cable lock slot type | Kensington |
Weight and Dimensions| Depth | 272.4 mm |
|---|---|
| Width | 482 mm |
| Height | 58.5 mm |
| Weight | 2100 g |
Lists the items included with the Pioneer DJ DDJ-400 controller.
Guides on how to view the introductory guide for rekordbox setup.
Explains what rekordbox software is and its DJ performance function.
Instructions for installing the rekordbox software on your computer.
Describes the components and controls located on the top surface of the DDJ-400.
Explains how to connect speakers and microphones to the unit's terminals.
Details the procedure for connecting the DDJ-400 controller to a PC or Mac via USB.
Guides on launching rekordbox and checking audio setup for operation.
Steps to register audio tracks from your computer into rekordbox.
Procedure for loading a selected track into a deck for playback.
Explains how to set up controls and play a track from a deck.
Instructions on how to monitor audio output using headphones.
Steps to properly shut down rekordbox and disconnect the unit.
How to activate and manage 4-beat loops during playback.
Detailed steps for creating and managing manual loops.
How to halve loop playback length using specific buttons.
How to double loop playback length using specific buttons.
Adjusting the loop's start point using the jog wheel.
Adjusting the loop's end point using the jog wheel.
Setting and triggering cue points instantly from performance pads.
Step-by-step guide to set and recall hot cue points.
How to set and activate manual loops using performance pads.
Using performance pads to set beat loops of various lengths.
Moving playback position instantly by beat intervals using performance pads.
Loading and playing tracks from sampler slots using performance pads.
Using performance pads as a keyboard to trigger hot cues with pitch control.
Applying various effects by pressing performance pads.
Triggering release effects on performance pads.
Changing track key using performance pads with pitch adjustment.
How to set, save, and recall cue points on tracks.
Retrieving previously set cue or loop points.
Removing set cue or loop points from a track.
Starting track playback using channel fader or crossfader.
Steps to enter and exit the unit's utility settings mode.
How to set the master output to monaural or stereo sound.
Adjusting the peak limiter for the master output to prevent clipping.
Forcing the unit to operate as a MIDI controller regardless of rekordbox status.
Configuring the duration before the demo mode automatically starts.
Common problems and their solutions for the DDJ-400 and rekordbox.
Using the DDJ-400 with other DJ applications via MIDI.
Information on MIDI message specifications for the unit.
Details on the standard driver software used by the unit.
List of trademarks and registered trademarks associated with the product.
Important notes regarding copyright protection and usage of music content.
To Next Page
