Do you have a question about the Pioneer DDJ-RX and is the answer not in the manual?
Type | DJ Controller |
---|---|
Channels | 4 |
Frequency Response | 20 Hz - 20 kHz |
Soundcard | Yes |
Deck Control | 4 |
Filter | Yes |
Sampler | Yes |
Hot Cues | 8 per deck |
Software | Rekordbox DJ |
MIDI | Yes |
Jog Wheels | Yes |
Inputs | 2 x RCA (Line) |
Outputs | 2 x Master (XLR, RCA) |
USB | USB B |
Jog Wheel | Yes |
Signal-to-Noise Ratio | 107 dB |
Distortion | 0.003% |
Compatibility | Mac |
Pads | 16 |
Dimensions | 664 x 70.4 x 353.4 mm 26.1 x 2.8 x 13.9 in |
Details the main features and capabilities of the DJ controller.
Lists all the items included with the DJ controller upon purchase.
Instructions for downloading and installing the rekordbox and driver software.
Explains the driver software and how to use the ASIO settings utility for Windows.
Details how to connect various external devices and power sources to the unit.
Identifies and describes the rear panel components and their functions.
Describes the controls and terminals located on the front panel of the DJ controller.
Illustrates how to connect input devices like DJ players and turntables.
Illustrates how to connect output devices like speakers and amplifiers.
Details the functions of specific controls in the browser section.
Explains the functions and operations of the jog dial for playback control.
Describes how to use the needle search pad for track positioning.
Details how to use the tempo slider to adjust track playback speed.
Explains the operation of the play and pause button for tracks.
Details how to set, play, and call cue points for tracks.
Explains how to synchronize tempos and beat grids between decks.
Controls the activation of effect unit FX1 for the respective channel.
Adjusts the individual channel output gain for proper audio levels.
Allows boosting or cutting frequencies for each channel's audio.
Adjusts the audio signal level for each individual channel.
Controls and adjusts parameters for beat FX and release FX.
Adjusts beat fraction for synchronizing beat FX sound with track tempo.
Synchronizes with rekordbox dj platter display for visual feedback.
Step-by-step guide for connecting headphones, speakers, and computer.
Instructions for connecting the AC adapter to the unit and power outlet.
Guide for powering on external devices connected to the unit.
Instructions on how to launch the rekordbox software and activate the license.
Overview of the rekordbox dj software interface after loading a track.
Procedure for loading tracks into decks and initiating playback.
Guide for setting up headphone monitoring and adjusting levels.
Steps to properly close rekordbox and turn off the unit.
Explains how to use performance pads for hot cues, effects, and samples.
Details setting and calling out hot cue points for instant playback.
Describes how to apply effects using the performance pads.
Explains how to use the slicer function for beat slicing and loop creation.
Details loading tracks and playing samples using performance pads.
How to move playback position instantaneously without breaking rhythm.
Procedure for recording and playing back sampler performances using the sequencer.
Using hot cues while maintaining background playback with slip mode.
Performing scratches while maintaining background playback with slip mode.
Instructions for controlling two decks simultaneously for mixing.
How to use channel fader or crossfader for track playback start.
Adjusting sample volume based on performance pad tap strength.
How to recall stored cue or loop points in a track.
Process of analyzing tracks for BPM and waveform data in rekordbox.
Details on applying beat FX and release FX using the unit's controls.
How to configure and operate multiple beat FX simultaneously.
How to configure and operate single beat FX with adjustable parameters.
Configures the tempo setting for beat effects.
How to use release FX to smoothly transition from beat FX.
How to apply and adjust SOUND COLOR FX using the COLOR controls.
Instructions on how to start and stop recording mixed sound in rekordbox dj.
Guide for connecting DJ players or line-level devices to the unit.
Guide for connecting analog turntables or phono-level devices.
Instructions for connecting microphones to the unit's MIC terminals.
Steps to enter the unit's utilities mode for configuration.
Lists the various settings that can be changed within the utilities mode.
How to force the unit to operate as a general MIDI controller.
Enables or disables the channel fader start function.
Enables or disables the crossfader start function.
Adjusts the master output level attenuation settings.
Sets the velocity response curve for the sampler mode.
Adjusts the illumination patterns for the jog dial's white area.
Adjusts the sensitivity for the jog dial's touch sensor for better response.
Provides solutions for common problems and operational issues.
Illustrates the audio signal flow within the DJ controller.
Instructions on how to download the full rekordbox software manual.
Details on using the unit as a MIDI controller for non-rekordbox DJ software.
Lists registered trademarks and company names related to the product.