Need help?Do you have a question about the Pioneer DJM 600 - DJ Mixer 4 Channel and is the answer not in the manual?
General| Brand | Pioneer |
|---|---|
| Model | DJM 600 - DJ Mixer 4 Channel |
| Category | Music Mixer |
| Language | English |
Comprehensive safety guidelines to prevent hazards and ensure proper operation.
Record model and serial numbers for future reference and safety.
Explains cautionary symbols and warnings related to electric shock and maintenance.
Details FCC compliance, user rights, and interference correction.
Encourages safe listening practices to prevent hearing damage.
Guidance on proper placement to avoid heat, humidity, and ensure ventilation.
Advice on handling condensation when moving the unit between environments.
Proper methods for cleaning the product's surfaces without damage.
Highlights main functionalities like BPM, effects, and I/O terminals.
Lists items included with the product (pin plugs, instructions, warranty).
Diagrams and instructions for connecting audio sources like CD players and analog players.
Guidance on using red and white pin plugs for audio cable connections.
Details connections for microphones, headphones, amplifiers, and external effectors.
Identifies and explains controls on the mixer's front panel (1-11).
Details the main microphone input and its HI, MID, LOW level controls.
Details microphone, channel input/level controls, and equalizer settings.
Explains master output mode, level, monitoring, and talk over functions.
Covers channel/master volume, and cross fader channel assignment.
Explains fader start, cross fader curve selection, and volume adjustments.
Covers master balance, booth monitor level, and BPM display functions.
Details BPM range selectors, displays, and beat synchronization controls.
Covers effect/sampler selection, parameter adjustment, and activation.
Introduces the mixer's DSP for effects and BPM measurement.
Explains Delay, Echo, Auto Pan, and Auto Trans effects linked to BPM.
Explains operations for FILTER, FLANGER, REVERB, and PITCH SHIFTER effects.
Details SEND/RETURN for external effects and sampler recording/playback.
Step-by-step guide to measuring and displaying BPM using the auto counter.
Illustrates BPM display setup for channels 1 and 2.
Instructions for manually inputting BPM when auto measurement is not possible.
Details settings and parameters for delay, echo, pan, trans, filter, and flanger effects.
Lists TIME and LEVEL/DEPTH parameters for various effects.
Guides on setting delay time to match BPM for effective application.
How to adjust the mix ratio of original and delayed sound levels.
Explains settings and parameters for reverb and pitch shifter effects.
Guides on adjusting pitch and balancing original vs. pitch-shifted sound.
How to apply external effects to music using SEND/RETURN terminals.
Step-by-step guide to recording music beats into the sampler.
Demonstrates setting up sampler recording for a specific number of beats.
Explains different playback methods for recorded sampler sounds (Single, Loop, Stretch).
How to set the playback stop position for recorded sampler sounds.
How to start CD players using channel or cross fader controls.
Details cross fader start and back cue functionality for CD players.
Step-by-step guide to starting a CD player using the channel fader.
Step-by-step guide to starting a CD player or sampler using the cross fader.
Lists common problems, their possible causes, and countermeasures for the unit.
Details input/output levels, impedance, frequency response, and SN ratio.
Provides power supply, consumption, operating conditions, and dimensions.
Lists accessories included with the product.
Lists setting ranges for various effectors like delay, reverb, and pitch.
To Next Page