To Next PageTo Next Page
Need help?Do you have a question about the Pioneer DVL-909 and is the answer not in the manual?
General| Brand | Pioneer |
|---|---|
| Model | DVL-909 |
| Category | DVD Player |
| Language | English |
Provides a high-level overview of the unit's functional blocks and their interconnections.
Details the steps involved in the sequence from powering on to playing a disc.
Explains the operation of the focus servo for DVD and CD playback.
Describes the mechanisms and control of the tracking and slider servos.
Details the spindle motor control system and its servo operations.
Explains the process by which the player identifies the type of disc loaded.
Outlines the system control logic and operations specific to the DVL-909 model.
Covers the processing of video signals, including noise reduction and enhancement.
Details the analog video signal processing, filtering, and output stages.
Describes the Digital Interface and Data Bus (DIRB) block functions for the DV-S9.
Explains the high-fidelity audio system's capabilities, including 96KHz/24-bit processing.
Provides the methods to access and initiate the service test mode.
Explains the procedures to exit the service test mode and return to normal operation.
Details the specific functions and operations available within the test mode.
Operation to open and close the disc tray using the remote control.
Playback mode with demultiplex for outputting the playback screen.
Allows inputting a specific address for playback search functionality.
Function to change between disc sides, applicable for LD playback.
Switches between composite and component video output signals.
Enables special functions via specific remote control key combinations.
Enables additional special functions via different remote control key combinations.
Tabular summary of test mode commands and their associated functions.
Describes the display format and information presented during test mode operations.
Highlights specific items and their indications during test mode, such as spindle status.
Provides detailed explanations for all items displayed during test mode operations.
Describes how to measure and interpret disc error rates (C1 errors).
Explains how to measure and interpret disc jitter values for quality assessment.
Details the step-by-step process the player follows during startup.
Function to measure sine wave related to focus errors during startup.
Explains the process of identifying disc types and handling startup errors.
Describes the Sine-to-Sine Gain Control function for maintaining focus error levels.
Details the measurement of MIRR modulation degree for signal quality analysis.
Explains the Auto Focus Bias function for improving jitter on CDs and DVDs.
Describes the Automatic Gain Control adjustment during playback.
Explains common errors generated by the mechanism control computer.
Details of the PD4890A IC, serving as the Mode Control IC.
Information on PD0260A2/PD0261A2 ICs, used as Mechanism Control ICs for the DVL-909.
Details of the LA9700M IC, functioning as the RF IC.
Information on LC78650E-P IC, acting as the Servo DSP LSI.
Details of the PD4889A IC, functioning as the Mechanism Control IC.
Information on VYW1536 IC, used as Flash ROM.
Details of the PD3381A IC, functioning as the System Control CPU.
Information on MB86371 IC, serving as the MPEG2 Decoder LSI for DVD.
Details of the MB811171622A-100FN IC, used as a Code Buffer (SDRAM).
Information on CY2081SL-611 IC, functioning as the Clock Generate IC.
Details of the PD2058A IC, acting as the Digital Signal Processor for Audio.
Diagram and description of the front panel FL display segments and their functions.
Shows the pin assignments for the FL display's anode and grid segments.
Detailed table outlining the pin assignments for the FL display components.
