Do you have a question about the Pioneer Elite VSX-44 and is the answer not in the manual?
Channels | 7.2 |
---|---|
Power Output | 100 W per channel |
HDMI Inputs | 6 |
HDMI Outputs | 2 |
Network Connectivity | Ethernet, Wi-Fi |
Room Calibration | MCACC |
4K Ultra HD Pass-through | Yes |
3D Pass-through | Yes |
AirPlay | Yes |
Bluetooth | Yes |
Phono Input | Yes |
Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
Streaming Services | Pandora, Spotify, Tidal, Deezer |
Frequency Response | 5Hz-100kHz |
Total Harmonic Distortion | 0.08% |
Input Sensitivity/Impedance | 200 mV / 47 kΩ |
Digital Audio Inputs | Optical: 2, Coaxial: 1 |
USB Port | Yes |
Analog Audio Inputs | 5 |
Details on electrical shock, ventilation, and fire hazards.
Key safety guidelines for operating the unit.
Important warnings regarding product use and handling.
Step-by-step guide for initial setup and configuration.
MCACC setup and Phase Control for sound optimization.
Ultra HD, HDMI, Wireless LAN, Bluetooth, MHL, iPod support.
Roku, Spotify, AirPlay, DLNA, and Internet Radio capabilities.
High-res audio, gapless playback, Dolby Pro Logic IIz, Sound Retriever.
Sequence for connecting speakers, components, and initial settings.
Identification of buttons, displays, and LED indicators.
Explanation of primary control buttons and modes.
Buttons for source selection and audio modes.
Guide for inserting batteries and safety precautions.
Guide to different speaker system configurations (5.1, 6.1, 7.1).
Step-by-step guide for automatic acoustic calibration.
Continuing the MCACC setup process and confirmation.
Resolving issues like ambient noise or incorrect settings.
General steps for playing audio/video from a source.
Steps to pair Bluetooth devices with the adapter.
Selecting optimal sound modes for sources.
Detailed settings for EQ, Delay, Loudness, Phase, etc.
How to experience surround sound playback.
Listening to online radio and playing PC music files.
Using AirPlay for streaming and DLNA for media sharing.
Installing Spotify and connecting the unit to the network.
Configuring network IP addresses and proxy settings.
Executing the firmware update.
Steps to update the receiver's firmware.
Resetting network settings and checking system info.
Configuring speaker size, center, height, surround, and subwoofer.
Introduction to manual speaker configuration.
Setting speaker size, number, and type.
Introduction to synchronized operations via HDMI.
Configuring HDMI control, ARC, and standby through settings.
Common problems like no power or sudden shutoff.
Resolving issues with no sound or picture.
Resolving network connectivity and WLAN errors.
Issues with WMP, Internet Radio, Spotify, and Wi-Fi.
Resolving HDMI signal issues and compatibility.
Procedure to restore factory default settings.