8
DJS Ver. 1.600
2
2-2 Operating a DJS Player
You can use your MEP-7000 to operate either Player A or Player B on the [DJ Play] screen.
1 Start up DJS.
• Once DJS starts up, the [DJ Play] screen is displayed.
2 Operate either Controller A or Controller B.
• When you operate the various controls on your MEP-7000, such as the jog dial or
the tempo control slider, it operates the player in the [DJ Play] screen.
Functions that are Linked with the [DJ Play] Screen (Player Functions)
For information on functions of other buttons, please refer to “PARTS AND THEIR
FUNCTIONS” in the MEP-7000 operating instructions.
Spin (when in scratch mode)
If you spin the jog dial of your MEP-7000 very
quickly, even after you let go of it, it will continue
playing at the speed and in the direction that the
jog dial is rotating until it stops. You cannot do
this spin play with the mouse.
Simultaneous Operations
You can do the following operations at the same
time from an MEP-7000 Control unit.
・If you rotate the jog dial while holding down
the SEARCH button, it accelerates the search
play speed.
・While playing a cue point sample, if you hold
down the CUE button, you can operate controls
like the jog dial or the PITCH BEND button.
・When playing a cue point sample, if you hold
down the CUE button and the press the PLAY
button, even if you let go of the CUE button, it
keeps on playing without returning to the cue
point.
・When playing a cue point sample, if you hold
down the CUE button and press a loop
operating button (IN/CUE), the playback point
is recorded as the cue point. When you release
the CUE button, it returns to the cue point and
stands by.
・When you are in the SCRATCH JOG mode, if
you hold down the jog dial and press the CUE
button, the playback point is recorded as the
CUE point. When you release the jog dial, it
returns to the cue point and stands by.
・When in the SCRATCH JOG mode, if you hold
down the jog dial and press a loop operating
button (IN/CUE), the playback point is
recorded as the cue point. Even when you
release the jog dial, it continues playing
without returning to the CUE point.
Unlinked Player Functions
The following MEP-7000 buttons do not link up
with the [DJ Play] screen.
・CUE/LOOP MEMORY Button
・CUE/LOOP CALL Button
・JOG DIAL Button
・EJECT Button
Note
MEP-7000 Operation Buttons Controls Linked on the [DJ Play] Screen
PLAY/PAUSE PLAY/PAUSE Button
CUE CUE Button
SEARCH SEARCH Buttons
TRACK SEARCH TRACK SEARCH Buttons
TIME/A.CUE TIME MODE / AUTO CUE Button
IN/CUE IN/CUE Button
OUT/ADJUST OUT/ADJUST
RELOOP/EXIT RELOOP/EXIT
MASTER TEMPO MASTER TEMPO Button
TEMPO ±6/10/16/WIDE
TEMPO Control Range Button
TEMPO TEMPO Control Slider
JOG (–REV/+FWD) Jog Dial
PITCH BEND PITCH BEND Button
SCRATCH SCRATCH Button
Controller A
Controller B
To Next Page
Loading...
Need help?
General
Weight and Dimensions
