Pioneer PD-F904 User Manual

CONTENTS
TRANSPORTATION SCREW
TRANSPORTATION SCREW
CONFIRM SUPPLIED ACCESSORIES id
PUT BATTERIES INTO THE REMOTE CONTROL UNIT
REMOTE CONTROL OPERATIONS .... sateen
CAUTIONS REGARDING HANDLING ..
CONNECTIONS oo.
NAMES AND FUNCTIONS OF PARTS
BEFORE OPERATING THE PLAYER.......
BASIC OPERATION |...
To play a compact disc... :
To stop and start playback ..........
Changing discs during playback ..
Selecting the playing mode
Direct search - To search for a particular disc or track
(with remote control unit) ..... dtideheneyo hase sapebbeteranettsatons utters -13
Disc search - To search for a particular disc
Manual search - To search for a particular passage
Track search - To search for a particular track
VARIOUS OPERATIONS
To play only the desire:
To repeat playback (repeat play) ..
Random playback - To play all tracks i in n random ‘order <h
Time display
ADLC (Automatic Digital Level Controller) .
TO PLAY ONLY DESIRED TRACKS/DISCS
Disc alf program
Direct program
Program playback
- To program tracks/discs in desired order oo... eee 16
To reserve the program 5
Programming a pause ..
To erase a programmed s
To check theprogram
To clear all of the program contents and
to cancel the program made
REMOTE CONTROL OPERATION (PD-F100E only) .
To store the DISC TITLE (or CUSTOM TITLE)
into the remote controf unit
To search for a desired disc
To search for a desired disc (or CUSTOM)
using the first character
To copy the DISC (or CU
If the battery indicator lights
In order to protect the inside of Gus unit fom vibration and shocks
during transportation, the internal mechanism is fixed wit
transportation screws.
Before using the player, remove the throe tansportation screws
located on the bottom panel by turning the screws counter clockwise
with a Philips or flat-blade screwdriver
if this unit is placed with the top panel of right-side panel down after
the screws have been removed, the internal mechanism will fall Be
sure to place the unit with left side panel down and remove the
screws {red x 3). Before tilling the unit, confirm that no discs are
inserted in the player.
Do not tilt this unit with discs left inside it, for this will cause
malfunction.
Transportation screws
(red)
Retain all screws as they will be necessary when the unitis to
be transported.
Never remove any screws other than the transportation
screws,
When re-transporting this unit in the future, remove all discs in the
player and close all Racks (page 8). Turn off the POWER STANDBY/
ON switch and leave the unit in STANDBY mode for 10 seconds
or more. And then, tighten the transportation screws by turning
them with the crossed ro flat-blade screwdriver clockwise until it
stops. Be careful not to tighten the screws too firmly,
When tightening the screws, place the unit with left side panel
down
TROUBLESHOOTING ........... 21
SPECIFICATIONS . 7
INDEX CARD.....
.. Back cover
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging
the cord and never touch the power cord when your hands are wet
as this could cause a short circuit or electric shock. Do not place the
unit, a piece of furniture, etc., on the power cord, or pinch the cord.
Never make a knot in the cord or tie it with other cords. The power
cords should be routed such that they are not likely to be stepped on.
Adamaged power cord can cause a fire or give youan electrical shock.
Check the power cord once ina while. When you find it damaged, ask
your nearest PIONEER authorized service center or your dealer for a
replacement.
4
<PRE1222>
En

Pioneer PD-F904 Specifications

General

Brand	Pioneer
Model	PD-F904
Category	CD Player
Language	English