Pioneer PDP-4340HD

4
Basic Operation
1
3
4
2 -1
2 -2
2 -1
2 -2
Operate the remote control while pointing it towards the Plasma Display's remote control sensor.
* If you switch power to the unit off, press the Plasma
Display's POWER button.
Remote Control Sensor
Confirming power supply to the Media Receiver and Plasma Display
Basic remote control operation
* If the STANDBY indicators do not light even after pressing the POWER buttons, please refer to P.5.
Using these instructions is convenient until you become accustomed to operating the units.
For more details refer to the Operating Instructions.
Confirm that the Media Receiver and Plasma Display STANDBY indicators are lit red.
If they are not lit, press the Media Receiver and Plasma Display POWER buttons.
* Press the button with the same number and color on the
remote control.
Switch power on.
Watching conventional TV channels
Press the ANT button, and select ANTENNA.
Input the number of the desired channel, or select the
desired channel with the CH +/- button.
Watching digital TV channels
Press the DTV button.
Input the number of the desired channel, or select the
desired channel with the CH +/- button.
Watching DVD and VCR images
Press the INPUT button.
Adjust volume level.
Switch power off.
*
POWER Button
POWER Button
STANDBY Indicator
STANDBY Indicator
Media Receiver
Plasma Display
1
4
3
2 -1
2 -2
2 -2
2 -1
2 -1
*
2 -1