Need help?Do you have a question about the Pioneer pl-930 and is the answer not in the manual?
Motor and Turntable| drive system | Direct-drive |
|---|---|
| power requirements | AC220 - 240V, 50, 60Hz |
| motor type | Quartz PLL Hall motor |
| power consumption | 12W |
| turntable platter diameter | 310mm |
| turntable platter material | aluminum alloy die-cast |
| dimensions | 420(W) x 108(H) x 367(D)mm |
| speeds | 33-1/3 and 45rpm |
| wow and flutter | Less than 0.012% (WRMS) |
| weight | 5.9kg/13lb |
PC-3MC Specifications| stylus type | 0.5mil diamond (PN-3MC) |
|---|---|
| output voltage | 2.5mV |
| signal-to-noise ratio | More than 78dB (DIN-B) |
| tracking force | 1.7g to 2.3g (proper 2g) |
| frequency response | 10 to 32, 000Hz |
| recommended load | 50kΩ |
Tonearm| type | Static-balance type, Straight pipe arm |
|---|---|
| effective arm length | 221mm |
| overhang | 15.5mm |
| usable cartridge weight | 3g (min.) to 8g (max.) |
Details drive system, motor, platter, speeds, wow/flutter, and signal-to-noise ratio.
Covers tonearm type, effective length, overhang, and usable cartridge weight.
Lists operational features like auto mechanism, anti-skating, and cueing.
Includes power requirements, consumption, dimensions, and weight for different models.
Details specifications for the PC-3MC cartridge type, including stylus and output voltage.
Lists components for the XWR-024 power supply assembly.
Lists components for the XWR-029 power supply assembly.
Lists components for the XWM-085 control assembly.
Lists components for the XWX-082 LED assembly.
Schematic diagram for the motor assembly.
Schematic diagram for the LED assembly (B).
Schematic diagram for the control assembly.
Power supply circuit diagram for R and R/G types.
Schematic diagrams for the XWR-024 and XWR-029 power supply assemblies.
To Next Page
