Pioneer PL-L70 User Manual

Operating
Instructions
STEREO TURNTABLE
L-L.7O
Thank you for buying this Pioneer product.
Please read through these operating instructions and then you
will know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference.
In accordance with the power and voltage requirements of dif-
fering areas, the following model names are used to designate
models with differing electrical specifications.
Line voltage
HEM, HB,
a.c. 220, 240 valts © (Switchable voltage}
INEZ a : Beret
20-240 volts ~
S,$/G, SS | AC 110, 120, 220, 240 volts (Switchable voltage)
Ip, D/G AC 120, 220, 240 volts {Switchable voltage)
R, RIG meet "AC 1 10120, 220~240 volts (Switchable voltage! |
Ku,Ko) [AC 10vols
YP, YB 6. 240 volts ~~ "|
NOTES:
* The model names are stamped an the packing case.
° These operating instructions are prepared on the basis of the
HEM model, and they can be used for other models. Although
the design of the power plug and the power outlet shown may
differ from the actual one, the operating procedures are the
same.
WARNING: to prevent eine OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Panel Facilities
Operations before Use
R&GOrE Play: sisicactcnrmamivenearenennneeaie ecveetnelic
ee EAT i
________CONTENTS___
Ru,
LINE VOLTAGE SELECTOR SWITCH
[only multi voltage models are provided with this
switch but U.S.A, and Canada models are not pro-
vided with this switch]
The line voltage selector switch is located on the top of the
cabinet of this turntable. Before your turntable is shipped from
the factory, the switch is set to the power requirements of the
turntable’s destination. Check that it is set properly before
plugging the power cord into the outlet. If the voltage is not
properly set or if you move to an area where the voltage re-
quirements differ, adjust the selector switch as follows:
e Provide yourself with a medium-sized screwdriver, Insert
the tip of the screwdriver into the groove of the selector
switch and turn it so that the power voltage marking of
your area points to the arrow.
a
IMPORTANT NOTICE [For U.S.A, and Canada
models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep in a secure area. This is for your security.
Maintenance ...
Specifications .
TOUbEShOStIN” -wenessedemewerareetickens 12
Y) PIONEER’

Pioneer PL-L70 Specifications

General

Drive method	Direct drive
Motor	DC Motor
Platter	Aluminum
Speeds	33 and 45rpm
Wow and Flutter	0.025% WRMS
Signal-to-Noise Ratio	78 dB
Cartridge weight range	4-8 g

Summary

LINE VOLTAGE SELECTOR SWITCH

IMPORTANT NOTICE [For U.S.A. and Canada models]

SAFETY INSTRUCTIONS

OUTDOOR ANTENNA GROUNDING

Explains proper grounding procedures for outdoor antennas to protect against voltage surges and static.

IMPORTANT 1

Explains the meaning of the lightning flash symbol indicating dangerous voltage.

IMPORTANT 2

Provides guidance on connecting AC power outlets and the order of connections.

FOR USE IN THE UNITED KINGDOM

Notes regarding power plug supply for units sold in the UK and wiring color codes.

PANEL FACILITIES

OPERATIONS BEFORE USE

ASSEMBLING THE TURNTABLE

Details the procedure for assembling the turntable, including checking parts and removing transit screws.

CONNECTING THE TURNTABLE AND AMPLIFIER

Guides on connecting the turntable to an amplifier, including ground and output cords.

RECORD PLAY

RECORD PLAY PROCEDURE (AUTO PLAY)

Step-by-step guide for initiating automatic playback of a record.

MANUAL PLAY

Instructions for playing records manually, useful for non-standard situations or specific tracks.

REPEAT PLAY

Describes how to set the turntable to automatically repeat playback of a record side.

OPERATIONS FOR STOPPING PLAY

Details how to stop playback, either completely or temporarily suspending it.

PROGRAMMED PLAY

Explains how to program a specific sequence of tracks for playback, up to 8 tracks.

PLAYING SPECIAL RECORDS

Discusses how the automatic mechanism may behave with special record types and how to handle them.

LOCATE, SKIP OPERATIONS

How to use the locate and skip functions to move the tonearm to specific tracks or positions.

SYNCHRO RECORDING

Describes linking turntable operation with a Pioneer tape deck for synchronized recording.

ADJUSTING THE STYLUS DESCENT POSITION

Guide for adjusting the stylus descent for accurate track selection during programmed playback.

MAINTENANCE

REPLACING THE STYLUS

Information on stylus service life, damage prevention, and using genuine replacement styli.

STYLUS REPLACEMENT PROCEDURE

Step-by-step instructions for safely removing the old stylus and installing a new one.

MAINTAINING YOUR RECORDS

Recommendations for cleaning records to ensure optimal sound quality and longevity.

MAINTAINING THE STYLUS

Advice on cleaning the stylus to remove dust and debris, and what to do if cleaner is needed.

CONDENSATION

Explains how condensation can affect performance and how to mitigate it.

SPECIFICATIONS

Motor and Turntable

Details the specifications related to the drive system, motor, platter, speeds, and tonearm type.

Miscellaneous

Covers power requirements, power consumption, dimensions, weight, and included accessories.

INFORMATION TO USER [FOR U.S.A. MODEL]

Provides FCC compliance information and user guidance for US models regarding radio frequency interference.

TROUBLESHOOTING