To Next PageTo Next PageWhat to do if my Pioneer S-51W has no sound but the indicator is lit?
If your Pioneer Subwoofer's indicator is lit but there's no sound, there are a couple of things to check: * First, the accessory RCA plug cord might be connected incorrectly or disconnected altogether. Double-check the connection and make sure it's secure. * Second, the VOLUME knob might be set to MIN. Try slowly turning it clockwise to increase the volume.
How to fix a Pioneer S-51W Subwoofer that has no power?
If your Pioneer Subwoofer isn't getting power and the indicator light doesn't turn on when you flip the power switch, the power supply plug might not be fully inserted. Make sure the plug is securely inserted into the outlet.
Why is my Pioneer Subwoofer sound distorted?
Sound distortion can occur for a couple of reasons. First, the level might be too high. Try turning the VOLUME knob counter-clockwise to lower it. Second, the input level could be too high. In this case, turn the amplifier’s output level (volume, bass control, bass boost) counter-clockwise to reduce it.
Why is the power indicator on my Pioneer S-51W Subwoofer lit red?
If the power indicator on your Pioneer Subwoofer is lit red, the auto standby function is likely activated. Try turning the auto standby function off.
How to reduce noise when listening to AM/FM broadcasts on my Pioneer Subwoofer?
If you're experiencing excessive noise while listening to AM or FM broadcasts with your Pioneer Subwoofer, the AM loop antenna or FM indoor antenna might be too close to the unit. Try increasing the distance between the AM or FM antenna (for indoor use) and the subwoofer.
Why does my Pioneer Subwoofer make a howling noise?
A howling noise from your Pioneer Subwoofer can be due to a couple of reasons: 1. The amplifier might not be getting power. Connect an amplifier and supply power. 2. The subwoofer level might be set too high. Try placing the subwoofer further away from the speakers and turn the VOLUME knob counter-clockwise to lower the volume.
What to do if my Pioneer Subwoofer sound is broken?
If the sound from your Pioneer Subwoofer is broken, the auto standby function might be activated. Try turning the auto standby function off.
Details precautions against electric shock, water, and naked flames to prevent fire hazards.
Advises on proper ventilation and suitable operating conditions for the unit.
Covers safe practices for using and unplugging the power cord to avoid shocks.
Crucial precautions for safely installing the subwoofer, avoiding falls and damage.
Explains the automatic standby mode and its activation/deactivation.
A guide to identify common symptoms, their causes, and remedies for the subwoofer.
General
