How to fix a Pioneer Subwoofer with no sound but the indicator is lit?
If your Pioneer Subwoofer has no sound but the indicator is lit, first check the accessory RCA plug cord connections to ensure they are correctly connected. If the connections are correct, then check the VOLUME knob. If it’s set to MIN, turn it clockwise slowly to increase the volume.
What to do if my Pioneer Subwoofer has much noise when listening to AM or FM broadcasts?
If you're experiencing a lot of noise when listening to AM or FM broadcasts with your Pioneer Subwoofer, the AM loop antenna or FM indoor antenna might be too close to the unit. Try increasing the distance between the AM or FM antenna (if it's for indoor use) and the subwoofer.
What to do if my Pioneer S-LX70W sound is distorted?
If your Pioneer Subwoofer is producing distorted sound, it could be due to the level being too high. Try turning the VOLUME knob counter-clockwise to reduce it. Alternatively, the input level might be too high. In that case, lower the amplifier’s output level (volume, bass control, bass boost) by turning it counter-clockwise.
Why does my Pioneer Subwoofer make a howling noise?
If you're experiencing howling noise from your Pioneer Subwoofer, it could be due to a lack of power supplied to the amplifier. Ensure you connect an amplifier and supply power. Also, the subwoofer level might be set too high. Try placing the subwoofer further away from the speakers and turning the VOLUME knob counter-clockwise to lower the volume.
Why is there so much noise when listening to AM/FM broadcasts with my Pioneer S-LX70W?
If you're experiencing a lot of noise when listening to AM or FM broadcasts with your Pioneer Subwoofer, the AM loop antenna or the FM indoor antenna might be too close to the unit. Try increasing the distance between the AM or FM antenna (for indoor use) and the subwoofer unit.
Why is there no sound coming from my Pioneer Subwoofer even though the indicator light is on?
If your Pioneer Subwoofer's indicator light is on but you're not hearing any sound, it could be due to a disconnected or incorrectly connected RCA plug cord. Double-check the connections to ensure they are correct. Also, verify that the VOLUME knob isn't set to MIN; slowly turn it clockwise to increase the volume.
To Next Page
General
