To Next PageTo Next PageWhat to do if my Pioneer S-W80S Subwoofer has no sound but the indicator is lit?
If your Pioneer Subwoofer indicator is lit but there's no sound, the speaker or accessory RCA plug cord might be incorrectly connected or disconnected. Double-check the connections and ensure they are correctly connected. Also, the LEVEL knob might be set to MIN. Try turning it clockwise slowly to increase the level.
Why Pioneer S-W80S Subwoofer indicator does not light up?
If your Pioneer Subwoofer's indicator doesn't light up when you turn on the power switch, it's likely that the power supply plug is not correctly inserted. Make sure to insert the plug securely.
Why is my Pioneer S-W80S sound distorted?
If the sound from your Pioneer Subwoofer is distorted, it could be due to the level being too high. Try turning the LEVEL knob counter-clockwise to lower the level. Alternatively, the input level might be too high; in that case, turn the amplifier’s output level (volume, bass control, bass boost) counter-clockwise to lower it.
How to stop howling noise from Pioneer S-W80S?
If you're experiencing howling noise with your Pioneer Subwoofer, ensure that the power supply to the amplifier is on and the speaker switch is turned on. Also, the subwoofer level might be set too high. Try placing the subwoofer a good distance from the speakers and turn the LEVEL knob counter-clockwise to lower the volume.
What to do if Pioneer S-W80S sound is weak?
If the sound from your Pioneer Subwoofer is weak even with the LEVEL knob turned up, the polarity of the speaker cords (from the amplifier or receiver to this unit) might be reversed. Confirm the polarity of the wires and connect them correctly.
Why is there so much noise when listening to AM/FM with my Pioneer S-W80S Subwoofer?
If you experience a lot of noise when listening to AM or FM broadcasts with your Pioneer Subwoofer, the AM loop antenna or the FM indoor antenna might be too close to the unit. Increase the distance between the AM or FM antenna (for indoor use) and the subwoofer.
General| Type | Powered Subwoofer |
|---|---|
| Power Output | 80W |
| Driver Size | 8 inches |
| Enclosure | Bass Reflex |
| Inputs | Line Level, Speaker Level |
| Phase Switch | Yes |
| Crossover Frequency | 50 Hz - 200 Hz |
Precautionary checks for customer and technician protection.
Importance of using specified replacement parts for safety.
Lists parts related to the product's packaging and shipping.
Exploded view of the exterior components of the speaker system.
PCB connection diagram for the Input Assy.
PCB connection diagrams for Head Assy and LED Assy.
PCB connection diagram for the POA Assy.
PCB connection diagrams for POS Assy and PWS Assy.
Instructions for disassembling the amplifier and subwoofer.
