Need help?Do you have a question about the Pioneer SA-610 and is the answer not in the manual?
General| Frequency Response | 10 Hz to 50 kHz |
|---|---|
| Damping Factor | 30 (8 ohms) |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Speaker Load Impedance | 4 ohms to 16 ohms |
| Dimensions | 420 x 142 x 362 mm |
| Channel Separation | 65 dB |
| Power Output | 30 watts per channel (8 ohms, 20Hz-20kHz) |
Lists the types and quantities of semiconductor components used in the amplifier.
Details the power output, distortion, and input characteristics of the amplifier.
Specifies the audio frequency range the amplifier can reproduce accurately.
Describes tone adjustments, subsonic filter, and loudness compensation.
Quantifies the amplifier's noise floor and lists power requirements and dimensions.
Mentions included accessories like operating instructions.
Explains the power on/off button and speaker system selection options.
Details bass/treble adjustment and input source selection methods.
Describes volume control, headphone jack usage, and indicator lights.
Explains loudness, subsonic filter, and tape monitoring switches.
Details how to adjust the sound balance between left and right channels.
Instructions for removing the bonnet case, front panel, and bottom plate.
Diagram and labels for components on the front panel.
Diagram showing internal components visible from the front.
Diagrams showing internal components and rear panel connections.
Explains the design and function of the equalizer amplifier stage.
Details the complementary SEPP power amplifier circuit and its performance.
Describes the circuit protecting speakers from DC voltage and muting signal.
Procedure for setting the idle current for optimal performance.
Steps to calibrate the output power indicator level.
Exploded view diagram of the amplifier's external parts.
List of part numbers and descriptions for external components.
Exploded view diagram of the amplifier's internal components.
Comprehensive list of part numbers and descriptions for internal components.
Explains resistor coding, safety marks, and lists assemblies/semiconductors.
Detailed circuit schematics for the amplifier's main sections.
Diagrams showing the pinouts and types of transistors and ICs.
Diagrams showing how components connect on the printed circuit boards.
Detailed list of components on the amplifier's PC boards.
Lists of components for specific assemblies like tone, switches, and volume.
Lists parts related to the packing and shipping of the unit.
To Next Page
