Need help?Do you have a question about the Pioneer SA-606 and is the answer not in the manual?
General| Input Sensitivity MM | 2.5mV |
|---|---|
| Input Sensitivity Line | 150mV |
| Signal to Noise Ratio Line | 90dB |
| Damping Factor | 30 |
| Speaker Load Impedance | 4Ω to 16Ω |
| Frequency Response | 10Hz to 50kHz |
| Total Harmonic Distortion | 0.1% |
| Dimensions | 420 x 150 x 295mm |
| Channel Separation MM | 50dB |
| Channel Separation Line | 50dB |
Details the 8-transistor direct-coupled complementary OCL circuit.
Procedure to set and check the idle current of the amplifier.
Detailed circuit diagram of the amplifier's functional blocks.
To Next Page
