Need help?Do you have a question about the Pioneer SA-9500 and is the answer not in the manual?
General| Power Output | 80 watts per channel into 8Ω (stereo) |
|---|---|
| Total Harmonic Distortion | 0.1% |
| Damping Factor | 30 |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Signal to Noise Ratio | 90dB (line) |
| Semiconductors | 4 x IC |
Covers the FUNCTION switch for source input, MIC JACK, and TAPE MONITOR/DUPLICATE switches.
Detailed steps for playing records and operating the tuner, including control adjustments and notes.
Instructions for using two tape decks to copy and edit audio tapes efficiently.
How to use the preamp and power amp sections independently or with external amplifiers for comparison.
Guide to creating multi-amplifier systems using crossover networks and multiple power amps for enhanced audio.
Details semiconductor components, power output, distortion, and frequency response of the power amplifier.
Specifications for the preamplifier, input sensitivity, impedance, tone control ranges, and filters.
A checklist to diagnose and resolve issues related to no sound output from various sources like records or radio.
Guidance on identifying and fixing noise problems and distortion occurring during record or tape playback.
To Next Page
