Pioneer SC-LX71 - The Other Setup menu; Multi Channel Input Setup

Other Settings
12
91
En
The Other Setup menu
The Other Setup menu is where you can make
customized settings to reflect how you are using the
receiver.
1 Set the operation selector switch to RCV , then press
HOME MENU .
An on-screen display (OSD) appears on your TV. Use /
// and ENTER to navigate through the screens
and select menu items. Press RETURN to confirm and
exit the current menu.
2 Select ‘ System Setup ’ from the HOME MENU .
3 Select ‘
Other Setup ’, then press ENTER .
4 Select the setting you want to adjust.
If you are doing this for the first time, you may want to
adjust these settings in order:
• Multi Ch In Setup – Specifies the optional settings
for a multi-channel input.
• ZONE Audio Setup – Specify your volume setting for
a MULTI-ZONE setup (see ZONE Audio Setup on
page 92).
• SR+ Setup – Specify how you want to control your
Pioneer flat screen TV (see SR+ Setup for Pioneer flat
screen TVs on page 92).
• HDMI Control Setup – Synchronizes this receiver
with your Pioneer component supporting HDMI
Control (see Setting the HDMI Control mode on
page 87).
• Flicker Reduction – Adjust the way the OSD screen
looks (see Flicker Reduction Setup on page 92).
5 Make the adjustments necessary for each setting,
pressing
RETURN to confirm after each screen.
Multi Channel Input Setup
You can adjust the level of the subwoofer for a multi-
channel input. Also, when the multi-channel input is
selected as an input source, you can display the video
images of other input sources. In the Multi Channel Input
Setup, you can assign a video input to the multi-channel
input.
1Select ‘ Multi Ch In Setup ’ from the Other Setup
menu.
2 Select the ‘
SW Input Gain ’ setting you want.
• 0dB – Outputs sound of the subwoofer at the level
originally recorded on the source.
• +10dB – Outputs sound of the subwoofer at the level
increased by 10 dB.
3 Select the ‘ Video Input ’ setting you want.
When the multi-channel input is selected as an input
source, you can display the video images of other input
sources. The video input can be selected from the
following: DVD, TV/SAT, DVR 1, DVR 2, VIDEO 1, VIDEO
2, VIDEO 3, OFF.
4 When you’re finished, press RETURN .
You will return to the Other Setup menu.
A/V RECEIVER
Exit Return
a.Manual SP Setup
b. Input Setup
c. OSD Language
d. Other Setup
4.SystemSetup
4d.Other Setup
A/V RECEIVER
Exit Return
1. Multi Ch In Setup
2. ZONE Audio Setup
3. SR+ Setup
5. Flicker Reduction Setup
4. HDMI Control Setup
4d.Other Setup
A/V RECEIVER
Exit Return
1. Multi Ch In Setup
2. ZONE Audio Setup
3. SR+ Setup
5. Flicker Reduction Setup
4. HDMI Control Setup
4d1.Multi Ch In Setup
A/V RECEIVER
Exit Finish
SW Input Gain : 0dB
Video Input : DVD
4d1.Multi Ch In Setup
A/V RECEIVER
Exit Finish
SW Input Gain : +10dB
Video Input : DVD
SCLX81_71.book 91 ページ ２００８年７月２５日 金曜日 午後３時１分