Do you have a question about the Pioneer SX-315 and is the answer not in the manual?
Type | Stereo Receiver |
---|---|
Tuning Range | FM, AM |
Power Output | 100 W + 100 W (6 ohms, 1 kHz, THD 0.7%) |
Frequency Response | 10 Hz to 100 kHz |
Total Harmonic Distortion | 0.7% (1 kHz, 6 ohms, 100 W) |
Input Sensitivity | 200 mV (line) |
Signal to Noise Ratio | 95 dB (line, IHF-A) |
Dimensions | 420 x 147 x 323 mm |
Weight | 7.2 kg |
Speaker Impedance | 4Ω to 16Ω |
Checks for continued protection of customer and service technician, including leakage current check.
Special safety characteristics of electrical/mechanical parts and use of replacement components.
Conformity to regulations, safe servicing environment, and specific safety procedures for repairs.
Procedures for optimum adjustments and characteristic confirmation as per manual.
Use specified lubricants, glues, and adhesives for proper repairs.
Proper cleaning procedures for parts like optical pickups and tape heads to restore performance.
Setting shipping mode or installing shipping screws to protect products during transit.
Details power output (Continuous, RMS, Music) for Front, Center, Surround, and Subwoofer.
Specifies frequency range and antenna input for the FM tuner.
Specifies frequency range and antenna type for the AM tuner.
Details power requirements, consumption, dimensions, and weight.
Diagram showing the packing of the unit and included accessories.
High-level block diagram illustrating the signal flow and major components.
Procedure for adjusting idle current for transistors after replacement.
Information related to diagnosing issues, including protection circuit activation.
Diagram showing the physical location of various PCBs within the unit.
Description and function of front panel controls and indicators.