Need help?Do you have a question about the Pioneer SX-838 and is the answer not in the manual?
General| Power Output | 50 watts per channel into 8Ω (stereo) |
|---|---|
| Frequency Response | 10Hz to 50kHz |
| Tuning Range | FM, MW |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Output | 150mV (line) |
| Speaker Load Impedance | 4Ω to 16Ω |
| Semiconductors | 3 x IC |
| Total Harmonic Distortion | 0.3% |
| Damping Factor | 40 (8 ohms, 1kHz) |
Diagram showing how to connect FM/AM antennas, turntables, and tape decks.
Illustrates connecting speaker systems and other external audio equipment.
Procedure for aligning the FM receiver section using signal generators.
Steps for aligning the FM multiplex (MPX) decoder for optimal stereo reception.
Procedure for aligning the AM receiver section for accurate tuning.
Steps for adjusting and aligning the power amplifier for optimal output.
Detailed schematic and parts list for the tuner assembly.
Schematics and component lists for equalizer, mic, control, power amps, and PSU.
To Next Page
