To Next PageTo Next Page
Need help?Do you have a question about the Pioneer SX-535 and is the answer not in the manual?
General| Total Harmonic Distortion | 0.8% |
|---|---|
| Tuning Range | FM, MW |
| Input Sensitivity | 2.5 mV (MM), 150 mV (line) |
| Output | 150 mV (line) |
| Power Output | 20 watts per channel into 8Ω (stereo) |
| Frequency Response | 20Hz to 20kHz |
| Damping Factor | 30 |
| Speaker Load Impedance | 4 to 16 ohms |
| Weight | 9.8 kg |
Lists semiconductor types and quantities used in the receiver.
Details power output, distortion, bandwidth, and frequency response.
Covers sensitivity, selectivity, S/N ratio, and frequency response.
Details sensitivity, selectivity, S/N ratio, and frequency response.
Includes power requirements, consumption, dimensions, and weight.
Illustrates the functional blocks and signal flow of the receiver.
Diagrams showing signal levels across different stages and controls.
Identifies components and their locations on the top of the unit.
Identifies components and their locations on the bottom of the unit.
Step-by-step guide for tuning and calibrating the FM receiver.
Procedure for adjusting the FM Multiplex (MPX) demodulator circuit.
Procedure for tuning and calibrating the AM receiver.
Procedure for adjusting bias voltage in the power amplifier stage.
Instructions for routing and tensioning the dial cord for the tuning mechanism.
Details on how to pack the unit and lists associated part numbers.
Diagrams showing component breakdown and a list of all parts.
Illustrations of the unit's components arranged in an exploded view.
Complete circuit diagram showing interconnections between all sections.
List of capacitors, resistors, PC boards, and switches with part numbers.
Detailed list of components for the Tuner Assembly.
Detailed list of components for the Power Amplifier Assembly.
Detailed list of components for the Power Supply Assembly.
