To Next PageTo Next Page
Need help?Do you have a question about the Pioneer SX-424 and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Tuning Range | FM, MW |
| Power Output | 12 watts per channel into 8Ω (stereo) |
| Frequency Response | 20Hz to 20kHz |
| Total Harmonic Distortion | 0.8% |
| Speaker Impedance | 4Ω to 16Ω |
| Damping factor | 30 |
| Input Sensitivity | 2.5mV (MM) |
| Signal to Noise Ratio | 70dB (MM) |
Details specifications for the FM tuning capabilities of the receiver.
Details specifications for the AM tuning capabilities of the receiver.
Covers general specifications not specific to FM or AM tuning.
Overview of all controls, switches, and indicators on the front panel.
Procedure for aligning the Intermediate Frequency (IF) stages for FM and AM.
Procedure for fine-tuning and aligning FM/AM circuits for optimal performance.
Steps for aligning the Multiplex (MPX) decoder for stereo reception.
Covers additional alignment procedures not covered in previous sections.
Diagram showing unit connections and a list of miscellaneous parts.
Schematics, PCB layout, and parts list for the Tuner Unit (AWE-008).
Schematics, PCB layout, and parts list for the AF Unit (AWK-014).
