Need help?Do you have a question about the Pioneer SX-525 KW and is the answer not in the manual?
General| Total Harmonic Distortion | 0.8% |
|---|---|
| Tuning Range | FM, MW |
| Speaker Load Impedance | 4Ω to 16Ω |
| Signal to Noise Ratio | 85dB (line) |
| Weight | 10.2kg |
| Input Sensitivity | 2.5mV (MM) |
| Output | 150mV (line) |
| Channel Separation | 45dB (MM) |
| Power Output | 27 watts per channel into 8Ω (stereo) |
| Semiconductors | Transistors: 24, Diodes: 13 |
Details advanced circuitry like FETs, ICs, and amplifier performance for superior sound.
Explains line voltage selection, fuse types, and replacement procedures.
Guides on wiring, polarity, and optimal positioning of speaker systems for stereo effect.
Recommends selecting and connecting FM antennas, including T-type and outdoor options.
Details connecting tape decks for recording, emphasizing LINE INPUT and REC jacks.
Covers VOLUME, LOUDNESS, BASS/TREBLE, and BALANCE controls for audio shaping.
Includes TUNING KNOB, SELECTOR SWITCH, FM MUTING, and MODE SWITCH for reception and source management.
Identifies noise sources and solutions for FM/AM reception issues.
Identifies noise sources and solutions for issues during record playback.
Addresses symptoms like no power or howling, and their potential causes and remedies.
To Next Page
