Why does my Pioneer VSX-330-K Receiver show TEMP and the volume drops?
When 'TEMP' appears on your Pioneer Receiver's display and the volume decreases, it indicates that the unit is overheating. To resolve this, try improving ventilation by moving the unit. Additionally, reduce the volume level.
What to do if my Pioneer VSX-330-K Receiver shows OVERHEAT and turns off?
If your Pioneer Receiver displays 'OVERHEAT' and shuts down, it means the internal temperature is too high. Try these steps: move the unit to improve ventilation. Also, lower the volume level.
What to do if there is no sound from the Pioneer VSX-330-K Receiver subwoofer?
If you aren't hearing sound from the subwoofer of your Pioneer Receiver, check your front speaker settings. If the front speaker is set to LARGE, try changing it to SMALL. Alternatively, you can change the subwoofer setting to PLUS to restore the sound.
What to do if the Pioneer Receiver remote control is not responding?
If your Pioneer Receiver remote control isn't responding, you may need to first press the receiver button to control the receiver. If you want to control TUNER or USB, first press the TUNER or USB button on the remote.
Why can't I operate the remote control of my Pioneer Receiver?
If you're unable to operate your Pioneer Receiver's remote control, try the following: replace the batteries. Ensure you're within 7 meters and 30 degrees of the remote sensor. Remove any obstacles blocking the sensor, or try operating from a different position. Avoid direct light on the remote sensor.
How to fix no sound on my Pioneer Receiver?
If you're not getting any sound from your Pioneer Receiver when an input function is selected, try these solutions: first, use the VOLUME +/– buttons to increase the volume. Next, check if muting is enabled by pressing the MUTE button on the remote. Also, ensure the SIG SEL is correctly set to H (HDMI), C1/O1 (digital) or A (analog) according to your connections. Verify that all components are connected properly. Finally, check the audio output settings of the source component.
Why does my Pioneer VSX-330-K power suddenly turn off?
If your Pioneer Receiver suddenly turns off, first check the speaker wires at the rear panel to ensure no loose strands are touching each other or the panel. If you find stray strands, re-attach the wires carefully. Also, the Auto Power Down feature might be enabled, causing the receiver to turn off automatically at a set time.
Why is there no sound from the subwoofer connected to my Pioneer VSX-330-K?
If you're not getting any sound from your subwoofer with your Pioneer Receiver, check these things: make sure the subwoofer is turned on and if it has a volume knob, ensure it's turned up. If you are listening to a Dolby Digital or DTS source, verify that the source has an LFE channel, and switch the subwoofer setting in Speaker Setting to YES or PLUS. Also, switch the LFE ATT (LFE Attenuate) to LFEATT 0.
General| Receiver type | Surround |
|---|---|
| Audio output channels | 5.1 channels |
| Power output per channel (20-20KHz@8 Ohm) | 105 W |
| 3D | No |
| Product color | Black |
| Audio decoders | DTS Neo:6, DTS-HD, DTS-HD Master Audio, Dolby Digital Plus, Dolby Pro Logic II, Dolby TrueHD |
| Audio Return Channel (ARC) | Yes |
| Apple docking compatibility | Not supported |
| HDMI in | 4 |
| Composite video in | 2 |
| USB ports quantity | 1 |
| Supported radio bands | AM, FM |
| Preset stations quantity | 30 |
| Audio formats supported | AAC, MP3, WMA |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.45 W |
| Power consumption (typical) | 165 W |
| Connectivity technology | Wired |
Weight and Dimensions| Depth | 320.5 mm |
|---|---|
| Width | 435 mm |
| Height | 168 mm |
| Weight | 7300 g |
To Next Page
