To Next PageTo Next Page
Need help?Do you have a question about the Pioneer VSX-42 ELITE and is the answer not in the manual?
General| Weight | 17 lbs 12 oz (8.1 kg) |
|---|---|
| 3D Support | Yes |
| Audio Return Channel (ARC) | Yes |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
| Auto Speaker Calibration | MCACC |
| Frequency Response | 5Hz-100kHz |
| Input Sensitivity | 200mV |
| Dimensions | 16-9/16 x 6-1/4 x 12-5/8 inches (420 x 158 x 321 mm) |
Detailed guide to all front panel buttons, dials, and indicators for operating the receiver.
Explains the meaning of various indicators and symbols on the receiver's display.
Comprehensive guide to using the remote control for all receiver functions and component control.
Instructions for connecting speaker wires, including bare wire and terminal types.
Guidance on using HDMI, analog audio, and digital audio cables for optimal connections.
Procedures for connecting AM loop and FM wire antennas for improved reception.
Steps for connecting an iPod/iPhone/iPad to the dedicated USB terminal for audio playback.
Detailed guide to the automatic acoustic calibration process for optimizing surround sound.
Instructions on selecting input sources and starting playback of audio or video content.
How to control and play music and media files from a connected iPod.
Guide to playing audio and photo files from USB memory devices.
Lists supported audio and photo file formats for USB and network playback.
Explains various listening modes for different audio sources and speaker configurations.
How to use Phase Control to improve sound clarity and coherence.
Adjustments for sound parameters like EQ, sound delay, loudness, and digital formats.
Overview of playing music files from PCs and listening to internet radio via network.
Steps for configuring network settings, including IP address, proxy, and firmware updates.
Lists supported audio file formats for network playback on the receiver.
Detailed manual adjustment of speaker size, distance, and levels for optimal surround sound.
How to assign analog audio and component video inputs to specific sources.
Setting up how surround back or front height speakers are used.
Adjustments for video conversion, resolution, and aspect ratio for HDMI output.
Configuration of HDMI functions like Audio Return Channel and standby through settings.
Setting the receiver to automatically turn off after a period of inactivity.
Enabling network features like AirPlay to function when the receiver is in standby mode.
Configuring audio output for a second zone, including volume control.
Setting up input functions to trigger simultaneous operation via the 12V trigger output.
