Pioneer VSX-511S Operating Instructions

Operating
Instructions
AUDIO/VIDEO STEREO RECEIVER
Vo!
Voxolls
_—| DEMO MODE |
@ Ilustration shows model VSX-501.
® The demonstration mode is activated by turning on the power
switch while holding down the RETURN button (from power
standby condition). The demonstration will appear on the display.
| e Press any other switch to cancel the demonstration.
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how
to operate your model properly. After you have finished reading the
instructions, put them away in a safe piace for future reference.
In some countries or regions, the shape of the power plug and power
outlet may sometimes differ from that shown in the explanatory
drawings. However, the method of connecting and operating the unit
is the same.
WARNING: To PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel. Please
write this serial number on your enclosed warranty card and keep it in
@ secure area. This is for your security.
Note to CATV system installer
This reminder is provided to call the CATV system installer’s attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
[For Canadian model]
CAUTION: To PREVENT ELECTRIC SHOCK DO NOT USE THIS
(POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
:
ATTENTION: pour PREVENIR LES CHOCS ELECTRIQUES NE
PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR
UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT,
SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN
LAISSER AUCUNE PARTIE A DECOUVERT.
RETURN function
This function returns the unit to a set of initial settings and ready |
to broadcast tuner. This is helpful during troubleshooting or when |
no sound is output. For details, refer to page 19.
W) PIONEER’
The Art of Entertainment

Pioneer VSX-511S Specifications

General

Channels	5.1
Total Harmonic Distortion	0.09 %
Input Sensitivity	200 mV
Surround System Class	5.1 channel
Digital Sound Processor (DSP)	Yes
DSP Preset Qty	5
Input Impedance	47 kΩ
DSP Presets	Game, Hall
Tuner Bands	FM/AM
Tuning Range	FM: 87.5 - 108 MHz
Power Output	100W per channel (6 ohms, 1 kHz, THD 1%, 1 channel driven)
Inputs	3 x composite video input, 1 x digital audio input (coaxial), 1 x digital audio input (optical)
Outputs	1 x composite video output