What to do if the voltage is not 3.3 V on Pioneer VSX-84TXSi Receiver?
- CCraig Knight PhDAug 15, 2025
If the voltage is not 3.3 V, replace L1101, Q1103, or their surrounding components.
What to do if the voltage is not 3.3 V on Pioneer VSX-84TXSi Receiver?
If the voltage is not 3.3 V, replace L1101, Q1103, or their surrounding components.
What to do if there is no oscillation of 27 MHz output on Pioneer Receiver?
If there is no oscillation of 27 MHz output, replace X801.
How to fix 3.3 V voltage issue on a Pioneer VSX-84TXSi Receiver?
If the voltage is not 3.3 V, replace L803.
What to do if Pioneer Receiver has no 3.3 V voltage?
If the voltage is not 3.3 V, replace R839.
How do I resolve a 3.3 V voltage issue on my Pioneer Receiver?
If the voltage is not 3.3 V, replace L902.
How to fix 1.8 V voltage issue on Pioneer VSX-84TXSi?
If the voltage is not 1.8 V, replace L801.
What to do if the voltage is not 4.4 V on Pioneer VSX-84TXSi Receiver?
If the voltage is not 4.4 V, replace D1101.
How to resolve a 4.4 V voltage issue on Pioneer VSX-84TXSi Receiver?
If the voltage is not 4.4 V, replace D1102.
What to do if there is no 4.4 V voltage on Pioneer Receiver?
If the voltage is not 4.4 V, replace D1151.
Exploded view of the internal chassis parts and their reference numbers.
Exploded view of the rear panel parts, identifying each component.
Exploded view detailing the power amplifier block and its interconnected assemblies.
Exploded view of the front panel components and their respective part numbers.
Overall block diagram illustrating the receiver's functional blocks and connections.
Diagram showing the overall wiring connections between various assemblies and the main unit.
Schematic diagram for the Audio & Multi Channel Input Assy.
Schematic diagram for the V-Audio Assy.
Schematic diagrams for the Front-In and Headphone assemblies.
Schematics for Bridge1, Bridge2, Trans Side, and Bridge3 assemblies.
Schematics for the Power Amp Input and Power Protect assemblies.
Diagnostic procedures, including test modes, protection circuits, and troubleshooting guides.
List of parts, including integrated circuits (ICs).
| Channels | 7.1 |
|---|---|
| Total Harmonic Distortion | 0.09 % |
| Frequency Response | 5 Hz - 100 kHz |
| HDMI Outputs | 1 |
| Output Impedance / Channel | 6 Ohms |
| Signal-To-Noise Ratio | 100 dB |
| Input Impedance | 47 kOhm |
| Input Sensitivity | 200 mV |
| Audio D/A Converter | 192kHz / 24-bit |
| Input Channel Qty | 7 |
| Output Channel Qty | 7 |
| Tuner Bands | AM/FM |
| Preset Station Qty | 30 |
| HDMI Switching | Yes |
| Power Output (per channel) | 130 W |
| Audio Formats Supported | Dolby Digital, DTS |
| DSP Presets | Action, Drama, Advanced Music, Expanded Theater |
| Tuning Range | AM: 530 - 1700 kHz, FM: 87.5 - 108 MHz |
| Audio Inputs | 6 |












Loading...