Pixio PX27U Wave - Page 13

Input selection Short Key
Preset selection Short Key
Crosshair(LoS) selection Short Key
Open the Main OSD Menu
Turn the monitor On or Off
Short Key Guide
Activate the Preset Feature. Further press to cycle through the preset.
Activate the Signal Input Selection menu. Use and to navigate and M to select the source.
Input selection Short Key
Preset selection Short Key
Crosshair(LoS) selection Short Key
Open the Main OSD Menu
Turn the monitor On or Off
Short Key Guide
Activate the Preset Feature. Further press to cycle through the preset.
Activate the Signal Input Selection menu. Use and to navigate and M to select the source.
Input selection Short Key
Preset selection Short Key
Crosshair(LoS) selection Short Key
Open the Main OSD Menu
Turn the monitor On or Off
Short Key Guide
Activate the Preset Feature. Further press to cycle through the preset.
Activate the Signal Input Selection menu. Use and to navigate and M to select the source.
Activate the Signal Input Selection menu. Use and to navigate and M to select the source.
Activate the Signal Input Selection menu. Use and to navigate and M to select the source.
Input selection Short Key
Preset selection Short Key
Crosshair(LoS) selection Short Key
Open the Main OSD Menu
Turn the monitor On or Off
Short Key Guide
Input selection Short Key
Preset selection Short Key
Crosshair(LoS) selection Short Key
Open the Main OSD Menu
Turn the monitor On or Off
Short Key Guide
Activate the Preset Feature. Further press to cycle through the preset.
Activate the Signal Input Selection menu. Use and to navigate and M to select the source.
Input selection Short Key Preset selection Short Key Crosshair(LoS) selection Short Key Open the Main OSD Menu Turn the monitor On or Off
Short Key Guide
Activate the Preset Feature. Further press to cycle through the p
Activate the Signal Input Selection menu. Use and to navigate and M to select the sou
Input selection Short Key Preset selection Short Key Crosshair(LoS) selection Short Key Open the Main OSD Menu Turn the monitor On or Off
Input selection Short Key Preset selection Short Key Crosshair(LoS) selection Short Key Open the Main OSD Menu Turn the monitor On or Off
Short Key Guide
Activate the Preset Feature. Further press to cycle through the preset.
Activate the Signal Input Selection menu. Use and to navigate and M to select the source.
Input selection Short Key Preset selection Short Key Crosshair(LoS) selection Short Key Open the Main OSD Menu Turn the monitor On or O
Short Key Guide
Activate the Preset Featu
Activate the Signal Input Selection menu. Use and to navigate and M to select the sou