PizzaMaster PM 721E - Clock Timer

Clock timer
Clock timer (optional) – Basic operating
instructions
All PizzaMaster® ovens can be equipped with a 7-day
clock that switches the oven on and off automatically.
This ensures that the oven is always hot at the start of
the day and always switched off at the end of the day.
The clock timer has more functions than those men-
tioned here, but to keep these instructions simple we
shall describe only those functions needed to program
the oven to switch on and off automatically.
Important!
When using the clock timer, the oven’s main switch
must be in position A.
Info!
• The cloc
k can be programmed to the following
languages: English, German, Polish, Swedish,
Danish/Norwegian and Finnish.
• The clock adjusts automatically between summer
time and winter time.
1. 1. Programming language, date and time.
1. Press the Res key with a pointed object for approx.
1 second.
2. Select language by pressing
or . Confirm by
pressing OK.
3. Select year b
y pressing or . Confirm by
pressing OK.
4. Select month by pressing or . Confirm by
pressing OK.
5. Select day by pressing or . Confirm by
pressing OK.
6. Select hour by pressing or . Confirm by
pressing OK.
7. Select minute by pressing or . Confirm by
pressing OK.
2. Deletion of old start- and stop-times.
Before commence programming it is important that all
old (if any) start- and stop-times are deleted.
1. Press MENU. PROGRAM appears. Confirm by
pressing OK.
2. Press until CLEAR appears. Confirm by pressing
OK.
3. Press until ALL appears. Confirm by pressing
OK.
4. CONFIRM appears. Confirm by pressing OK.
5. Press until END appears. Confirm by pressing
OK.
The clock timer output
On = Oven activated
Off = Oven deactivated
Current date
= Summer time
= Winter time
Current time
= Current day of the week
1 – 7 weekdays
1 = Monday, 2 = Tuesday,...
MENU Menu selection:
AUTO = Operating mode
PROGRAM
= Programming of
new start- and stop-times
DAT/TIME = Not in use
MANUELL = Not in use
Select b
y pressing
OK Confirms your selection by
pressing
Res Language-, date- and time set-
tings will be deleted. The pro-
grammed start- and stop-times
will remain intact.
For correct programming of the clock timer it is important
that points 1, 2 and 3 is followed in correct order.