How to fix a Planar Monitor when no image is displayed?
If your Planar Monitor isn't displaying an image, verify the following: * Ensure the correct source is selected. * Confirm the main power switch is turned ON. * Check that the source equipment is working correctly. * Verify the input signal is compatible with the monitor.
Why does the picture color look poor on my Planar EP4650?
If the picture color on your Planar Monitor looks poor, try these steps: * Check the picture settings. * Reset the display. * If using YUV terminals, ensure the cables are correctly connected. * Check ADC calibration.
What to do if the Planar Monitor remote control doesn’t work?
If the remote control for your Planar Monitor isn’t working: 1. Make sure the batteries are new and installed correctly, and ensure the remote is aimed at the IR sensor. 2. Check that the remote control sensor is plugged in correctly. 3. Ensure the remote is aimed towards the back of the display, where the sensor is located.
General| Screen Size | 46 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Aspect Ratio | 16:9 |
| Brightness | 700 cd/m² |
| Viewing Angle | 178°/178° |
| Response Time | 8 ms |
| Connectivity | DVI-D, HDMI, VGA, DisplayPort, USB |
To Next Page
