What to do if my Planar EP5024K Monitor displays no image?
If your Planar Monitor is not displaying an image, here are a few things to check: * Ensure the correct source is selected. * Verify the main power switch is turned ON. * Confirm that the source equipment is operating correctly. * Check that the input signal is compatible with this display.
Why does the remote control not work with my Planar EP5024K?
If the remote control isn’t working with your Planar Monitor, consider the following: * Ensure the batteries are new and installed correctly, and that the remote is aimed at the IR sensor. * Make sure the remote control sensor is plugged in correctly. * Confirm the remote is aimed towards the back of the display, where the sensor is located.
How to fix poor picture color on Planar EP5024K?
General| Screen Size | 50 inches |
|---|---|
| Resolution | 3840 x 2160 (4K UHD) |
| Panel Type | IPS |
| Brightness | 350 cd/m² |
| Viewing Angle | 178°/178° |
| Response Time | 8 ms (GTG) |
| Color Gamut | 72% NTSC |
| Stand Adjustments | Tilt |
| VESA Mount | 400 x 400 mm |
| Power Consumption | 120W (Typical) |
| Connectivity | HDMI, DisplayPort, USB |
To Next Page
