How to fix a Planar ep46L Monitor when no image is displayed?
If your Planar Monitor displays no image, verify that the correct source is selected and the main power switch is turned on. Also, check that the source equipment is operating correctly and that the input signal is compatible with the display.
What to do if the Planar Monitor remote control doesn’t work?
If the remote control for your Planar Monitor isn’t working, first ensure the batteries are new and correctly installed, and that the remote is aimed at the IR sensor, which is located on the back of the display. Also, make sure the remote control sensor is properly plugged in.
Why does the picture color look poor on my Planar Monitor?
If the picture color on your Planar Monitor looks poor, check the picture settings and try resetting the display. If you're using YUV terminals, ensure the cables are correctly connected. You may also need to check the ADC calibration.
To Next Page
General