Planar ep46L - Turning the Ep46 L;Ep55 L on; Turning the Ep46 L;Ep55 L off; Adjusting the Volume

Turning the ep46L/ep55L On
ep46L/ep55L User Manual 23
Turning the ep46L/ep55L On
1 Insert the power cord into ep46L/ep55L and into the power outlet.
2 Ensure the AC switch is set to “—“.
3 Press the power button on the remote or side control panel.
Turning the ep46L/ep55L Off
With the power on, press the power button on the remote or side control panel to
put the LCD panel in a standby mode. To turn off power completely, turn the AC
switch to “O” or disconnect the AC power cord from the power outlet.
Note: If there is no signal for a certain period of time, the LCD panel will automatically go into
standby mode.
Adjusting the Volume
1 Using the remote, press the VOLUME - or VOLUME + to increase or decrease the
volume.
2 Press the
MUTE button to temporarily turn off all sound. To restore the sound,
press the
MUTE button again.
3 Close the battery cover.
Replace the battery cover in the direction of
the arrow and snap it back into place.