Using the Touch Screen
EP Series Ultra HD LCD Displays User Guide 47
Using the To uch Screen
You can use the touch screen to control your Windows, Mac or Linux operating
system. The Planar &1 Series is HID compliant, delivering up to 20 points of touch on
both Windows and Linux without a driver. Single touch only is supported for Mac
operating systems. To achieve more than single touch Mac support, drivers will need
to be installed, which can be found on http://www.planar.com/support.
Note: Ensure that you have installed the USB cable on the display to a computer.
Note: If an OPS PC is installed in the OPS slot, the OPS PC will automatically be connected
internally to the touch system. The touch functionality is configurable via the Touch Control
settings.
To Next Page
Loading...
