9
CONTROLS AND CONNECTORS
POWER CORD
Power Source:
1. Make sure that the power cord is the correct type required in your area.
2. This monitor has an internal universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
3. Connect the AC-power cord into the monitor’s power input socket. The AC-power cord
may be connected to either a wall power outlet or the power outlet socket on your PC,
depending on the type of power cord supplied with your monitor.
SIGNAL CABLE
Connecting the Signal Cable : Plug one end of the signal cable to the LCD monitor and the
other end to a computer or a video source (VGA, HDMI or DP).
Caution: If the AC outlet is not grounded (with three holes), install the proper grounding adapter
(not supplied).
Figure 2 Connecting Cables
1. Power Cable 6. Headphone Cable
2. DP Cable 7. USB Type B cable
3. HDMI Cable 8. USB Cable
4. VGA Cable 9. USB Cable
5. Audio Cable
To Next Page
