6) MASK DPI/MASK ALL:
MASK DPI mode: masks only the AF which has different PI.
MASK ALL mode: masks the AF which has different PI and NO RDS signal
with high field strength.
7)BEEP ON/BEEP OFF
BEEP ON mode: The beep is generated when any key is pressed.
BEEP OFF mode: The beep sound is disabled..
8) VOL LAST/VOL DEFA
VOL LAST: The radio switches on at the actual volume it had when it was last
switched off.
VOL DEFA: After pressing SEL button, AVOL will be displayed. Then you can
pre-select a constant switch-on volume by using the VOL knob.
9)CLK ON/OFF
CLK ON: Clock will always show on the display when power off.
CLK OFF: Clock will disappear on the display when power off.
9. SRC AND PTY (PROGRAM TYPE) BUTTON
Press the SRC button to change among tuner (radio), disc (when a disc is
loaded), USB (when an USB stick is inserted) and AUX mode.
In Radio mode, Press MODE/PTY button longer to select one of the following
mode: POP M- - NEWS
While selecting PTY TYPE, its selection is implemented by preset buttons as
described in preset key. (Press the CH-/CH+ to select the storage radio)
When POP M or NEWS is on, the previous PTY program and PTY word is
displayed on LCD.
If there are no keys entered for 2 seconds, previously selected PTY is searched.
During 1 loop, if desired PTY is not found, NO PTY is flashed, then return to
previous normal radio and PTY icon goes off.
10. BAND BUTTON
During radio mode:
Press this button briefly to select the radio broadcasting band you would
like to hear. The AM/FM band is toggled cyclically through the tuning bands:
->FM 1-> FM 2 -> FM 3 -> MW 1->MW 2 ->
.
During MP3 file in disc, or USB mode:
Press this button to turn to TRACK SEARCH mode, the LCD will display TRK
000 and flash the biggest digit 0 that the USB stick contain. (if the number of
tracks is less than 100 and more than 9, it will be TRK 00)
Then rotate the VOL knob to select the number of the flashing digit from 0 ~ 9.
Then press SEL button to confirm the number and flash next smaller digit 0.
With the same means, select the number of the flashing digit. After finishing
selecting the number of all flashing digit, press SEL button to play the track of
the selected serial number .
1. Power Button
2. Mute Button
3. TA
4.MENU UP
Button
5. SELECT
Button
Button
6. MENU Down Button
7. AF Button
8. AP Button
9. Band Button
10. Mode Button
11. Tune/Seek Up And Track Skip Up/FF Button
12. Tune/Seek Down And Track Skip Down/REW Button
13. SCAN BUTTON
14. Clock Button
15. PTY Button
16. CD Track TOP/>||/Radio Preset
1
17. CD Track INT/Radio Preset 2
18. CD Track RPT/Radio Preset 3
19. CD Track RDM/Radio Preset 4
20. Radio Preset 5
21. Radio Preset 6
OPERATION OF REMOTE CONTROL
4
6
8
14
16
18
20
7
11
15
19
21
1
5
3
13
12
10
9
17
2
MUTE
CLK
SELECT
-
AP
AF
5
6
SCN
TA
PTY
BAND
MODE
1
2
3
4
TOP
RDM
INT
RPT
POWER
To Next Page
Loading...
Need help?
General
