1080p IR Bullet PoE IP Camera
ICA-3460V
- 40 -
3.4.4 OSD & Mask Settings
OSD Settings
Display region of Device Title & Time can be settable.
Video Mask
Settings
Click “Video Mask Settings” to enter the main interface shown below:
Select one region on the image; click “Set” to save this setup.
Click “Query” to check the selected masking region.
Click “Delete All” to delete all Masking regions.
Or select one region, and click “Delete Selected”.
3.5 Networking
Use this menu to configure the network to connect the device and the clients.