Planet Networking & Communication WGS3-2620 - Displaying Bridge Information

WGS3 Layer 3 Switch User’s Manual
- 101 -
4.6.3 Displaying Bridge Information
The Bridge menu is used to display settings for the Spanning Tree Algorithm. For a more detailed
description of how to use this algorithm, refer to “6.1.3 Spanning Tree Algorithm”.
Menu Description
Spanning Tree Bridge
Information
Displays a full list of STA values used for the bridge.
Spanning Tree Port
Information
Displays a list of STA values used for each port, including status, designated
cost, designated bridge, and designated port.