Planet Networking & Communication WGS3-2620 - Using Port Mirroring on WGS3-404

WGS3 Layer 3 Switch User’s Manual
- 158 -
5.7.1.2.2 Using Port Mirroring on WGS3-404
On WGS3-404, the monitor port have to be on port 8.
Parameter Description
Enable Port Mirroring Port Mirror Enables or disables the mirror function.
Mirroring Mode Specify the outbound (TX_Mode) or inbound (RX_mode) packets for mirroring.
Mirror Port Specify the port to be monitored
Monitor Port The port whose used to attached computer with packet analyzer software.