WGS3 Layer 3 Switch User’s Manual
- 135 -
The following is the web interface of WGS3-404.
If this is your first time to access the management agent, you should define a new Administrator name
and password, record it and put it in a safe place. Select Mgt Setup / User Cfg. from the Main Menu, and
then enter a new name and password for the Administrator. Note that user names and passwords can
consist of up to 11 alphanumeric characters and are not case sensitive.
NOTE: Your are allowed three attempts to enter the correct password; on the third failed attempt the
current connection is terminated.
To Next Page
Loading...