WGS3 Layer 3 Switch User’s Manual
- 172 -
The VLAN Table Configuration of WGS3-404 is as the following:
Click Edit icon, the following screen will be shown.
Parameter Description
VLAN The ID for the VLAN currently displayed.
Range: 1-4094
MEMBERS Port entries may be marked as:
- : (Normal) Uses GVRP to determine port membership.
S : (Static) Adds port as a static entry. GVRP protocol is disabled.
R : (Registration Fixed) Adds port as a static entry. GVRP protocol messages are still
forwarded through this port.
X : (Forbidden) Disables GVRP for this VLAN on the specified port.
If a removed port is no longer assigned to any other group as an untagged port, it will
automatically be assigned to VLAN group 1 as untagged.
UNTAG Specify the outbound packets for this VLAN on this port should be tagged or
untagged.
U: The outbound packets for this VLAN on this port should be untagged.
T: The outbound packets for this VLAN on this port should be tagged.
To Next Page
Loading...