720p SIP Multi-unit Video Door Phone with RFID and PoE
HDP-5240PT
30
3.3 Quick Setting
The product provides a complete function and parameter setting. Users may need to have the network and
SIP protocol knowledge to understand the meaning all parameters represent. In order to let equipment users
enjoy the high quality of voice service and low cost advantage brought by the device immediately, here we list
some basic but necessary setting options in this section to let users know how to operate the HDP-5240PT
without understanding such complex SIP protocols.
Prior to this step, please make sure your broadband Internet can be normally operated, and you must
complete the connection of the network hardware.
Press and hold “#” key for 3 seconds; the door phone would report the IP address by voice.
Or you can also use the "Planet Door Phone Finder Utility" software to find the IP address of the device.
When the HDP-5240PT is powered on, wait for 30 seconds before running the device.
A. Log on to the Web device configuration.
B. On the line configuration page, service account, user name, server address and other parameters are
required for server address registration.
C. You can set DSS key on the function key page.
D. You can set Door Phone parameters on the web page (Phone Settings -> Features).
To Next Page
Loading...
Need help?
General
